Incinerate: medical waste and general waste Capacity to burn waste: 400-500kg/hr Fuel: Diesel Fuel Consumption: 10 […]
Medical Waste Incinerator, 50 to 60 Kg/hrSupport Health Sector Support ProjectPoint of Installation (Hospitals) Moi Voi, Makindu, Maragua, Eldama Ravine and Isiolo District Hospitals1. General DescriptionSupply, delivery, installation and commissioning of a medical waste incinerator suitable for disposal of Medical, General and Pathological waste in a safe and clean environment. The unit shall consist of two chambers and operate on the principal of controlled air and temperature. The unit shall consist a particulate remover (scrubbers) as stipulated in waste management regulations, 2006 (Legal notice NO. 121 of 29th September, 2006). The Unit shall be fully automatic and controlled by an automatic electronic controlled system except loading system which shall be manual. The unit shall be capable of incinerating between 50 to 60 kg of solid medical waste per hour. It shall be constructed from mild or aluminized steel lined with refractory material.Main unit Application For incineration, general and pathologicalCapacity 50 C 60 kg/h burn rateType Two combustion chambers type; primary and Secondary, controlled/forced combustion air type with a flue gas emission scrubbing unitOperating time Minimum 8 hours dailyOperating temperature From 850 0C to 1200 0C, Automatic controlledResidual Ash 5 to 10% 3.2 Primary ChamberConstruction Constructed from heavy duty mild or aluminized steel Orequal and approved equivalentInsulation material Refractory material lining similar or equal to calcium Silicate and hot face combination of heavy duty brickworkInternal Construction Fixed hearth type complete with gratings, concave bottomand charging door, lined with refractory materialCharging Door Suitable for manual loading of wastes and with smooth Dear seal equivalent of Ceramic seals with hinges.Door Lock Automatic, Electric typeAsh removal door Provided, for removing resultant bottom ash leftovers from the Primary chamberGratings […]
In Rhode Island, the management of medical waste, including incineration, is subject to strict regulations to protect public health and the environment. The Rhode Island Department of Environmental Management (DEM) oversees the generation, transportation, storage, treatment, and disposal of regulated medical waste. **Authorized Medical Waste Treatment Facilities:** The following facilities are authorized to treat regulated medical waste in Rhode Island: – **Rhode Island Hospital**, Providence – **Stericycle Inc.**, Woonsocket These facilities are permitted to handle and treat medical waste generated within the state. **Regulations and Prohibitions:** Rhode Island has enacted legislation to regulate the incineration of medical waste: – **2021 Legislation:** Prohibited new high-heat medical waste incinerators near residential neighborhoods, schools, nursing facilities, and sensitive environmental areas. – **2022 Bill (2022-H 8286):** Expanded the prohibition to include all types of high-heat waste incineration, not just medical waste. These measures reflect the state’s commitment to reducing air pollution and protecting community health. **Alternative Medical Waste Disposal Services:** […]
Mobile Incinerators for Construction Site Waste Disposal Introduction In the construction industry, managing waste efficiently is […]
It should be a three chambered incinerator The load capacity of 250 kg The housing for […]
“PYROLYTIC” combustion, by controlling the gasification of waste The incinerator manufacturer must avoid the release of […]
waste incinerator manufacturer china, Waste chamber Chamber capacity 300 kg Chamber volume .54m3 Chamber size (outside) […]
Mining operations, whether deep in the Amazon rainforest, the arid expanses of the Sahara, or the […]
Relocatable Waste Management System: Advanced Incineration Solutions by HICLOVER HICLOVER, Nanjing Clover Medical Technology Co.,Ltd is […]
Air exhaust needs develop restrictions on the quantity of contaminants that can be launched into the […]
Combustion Efficiency 99.99% Retention time Of the flow gases not less than 2 Sec in the […]
Estimados, agradecería una cotización por los hornos crematorios para mascotas modelo YD-30/ YD-50. Mobile Diesel Fired […]
Main unit Application For incineration, general and pathological Capacity 50 – 60 kg/h burn rate […]
Style for Pets Cremation Business Movable system & & Vehicle. Door Independent Placement for Small Pet […]
incinerator 500kg per hour, which model is YD500. the fuel type is diesel oil or natual […]
Including:Incinerator: Structure to be specified The mark to be specified Water temperature: 800 to 1000 ° […]